Start ago
First ,before starting the device first checks whether the rotating portion of the barrel scratching phenomenon, if scratching, should be timely adjusted.
Second, drum mixer after injection of oil can only be used at the discharge worm and sliding bearings should also be injected into the oil.
Third,Should start within a timely manner before the third clean barrel miscellaneous materials, the cylinder spacing device locking, and then start the machine, as in the direction of rotation after starting discovered not meet the requirements, should be promptly cut off the power, arbitrary two wires reversed phase, and then restart.
First ,before starting the device first checks whether the rotating portion of the barrel scratching phenomenon, if scratching, should be timely adjusted.
Second, drum mixer after injection of oil can only be used at the discharge worm and sliding bearings should also be injected into the oil.
Third,Should start within a timely manner before the third clean barrel miscellaneous materials, the cylinder spacing device locking, and then start the machine, as in the direction of rotation after starting discovered not meet the requirements, should be promptly cut off the power, arbitrary two wires reversed phase, and then restart.
Using
The fourth will be loaded concrete mixture inside the cylinder, close the cylinder cover, adjust the timing of the relay according to the mixing time
The fifth pressing the start button, the spindle will be driven stirring shovel operation, to automatically stop after a set time.
Sixth unloading the first stop, then the position will be expected to be limited by the handle is released, then rotate the hand wheel, driven by the worm wheel cylinder is rotated to facilitate the discharge location, stops, and then start the machine before running the spindle effluent, row material until a clean stop spindle running, rotating the hand wheel so that the material cylinder is reset.
After using
Seventh cleaning cartridge, the water to run into the barrel of the spindle inside the barrel clean residual material or sand can be cleaned.
After eighth cleanup equipment if not a long time, should be treated in transmission parts coated with oil, placed in ventilated and dry place.
The correct use of the drum-type mixer in order to bring more benefits to the user, although the device is not what valuable equipment, but if we make the appropriate equipment maintenance, operating according to the following rules case, make our equipment in the hands of users bring substantial benefits for the user.
The fourth will be loaded concrete mixture inside the cylinder, close the cylinder cover, adjust the timing of the relay according to the mixing time
The fifth pressing the start button, the spindle will be driven stirring shovel operation, to automatically stop after a set time.
Sixth unloading the first stop, then the position will be expected to be limited by the handle is released, then rotate the hand wheel, driven by the worm wheel cylinder is rotated to facilitate the discharge location, stops, and then start the machine before running the spindle effluent, row material until a clean stop spindle running, rotating the hand wheel so that the material cylinder is reset.
After using
Seventh cleaning cartridge, the water to run into the barrel of the spindle inside the barrel clean residual material or sand can be cleaned.
After eighth cleanup equipment if not a long time, should be treated in transmission parts coated with oil, placed in ventilated and dry place.
The correct use of the drum-type mixer in order to bring more benefits to the user, although the device is not what valuable equipment, but if we make the appropriate equipment maintenance, operating according to the following rules case, make our equipment in the hands of users bring substantial benefits for the user.
No comments:
Post a Comment